Eastwood Benchtop Mini Fabrication Metal Milling Machine 4 Inch x 16 Inch, 3/4 HP

With The Eastwood 4″ X 16″ Mini Mill You will be able to accomplish projects that simply are not possible without a milling machine. Now you can accurately Slot, Drill, Chamfer, Bevel, Face and Plunge Cut with this one machine. The tilting column allows for accurate angle work to be done and the Large R8 Taper accommodates common tooling. We’ve even included an 3/8″ Collet and end mill so you can begin machining right out of the box!

The Eastwood 4” X 16” Mini Mill is a highly capable machine able to perform as a Drill Press with up to 1/2” [13mm] drill shank capacity and as a fully functional manual Milling Machine with up to 5/8” end mill capacity (3/8” included). The 2 axis Table, along with a 45° left or right tilting column design, allows drilling or milling virtually any surface. A 0-2500 RPM Motor Control with a 2 Speed gearbox provides the versatility to accommodate most materials. The standard R8 Taper arbor will accept a wide variety of Collets, Drills and other accessories.

Specifications

Spindle Travel: 5 inches
Swing: 12-3/4 inches
Longitudinal Table Travel: 7-5/16 inches
Cross Table Travel: 4 inches
Head Travel: 7-1/2 inches
Head Tilt: Left and Right 45 deg
Maximum Distance Spindle to Column: 6-3/8 inches
Maximum Distance Spindle to Table: 11-1/2 inches
Drilling Cap for Steel: 5/8 inch
Range of Vertical Spindle Speeds: 0 – 1100, 0 – 2500 RPM
Quill Dial: 1.580 inch
Table Length: 15-3/4 inches
Table Width: 3-5/8 inches
Number Of T Slots: 3
T Slots Width: 0.465 inch
T Slots Height: 5/8″
T Slots Centers: 1-1/8 inches
Stud Size: 5/8 inch
Spindle Taper: R8
End Milling Cap: 1/2 inch
Face Milling Cap: 1-1/8 inches
Draw Bar Diameter: 12 mm
Draw Bar TPI: 7/16″ x 20
Draw Bar Length: 4 inches
Spindle Bearings: Permanently Sealed Ball Bearings

Home Workshop Friendly Size
Accurately, Slot, Drill, Chamfer, Bevel, Face and Plunge Cut
Tilting Column Allows for Accurate Angle Work
Large R8 Taper Accommodates Common Tooling
3/4 Horsepower Motor – 0-2500 RPM Motor Control with a 2 Speed Gearbox