3D Printer Motherboard, ESP32 WiFi 240MHz MCU 520Kb RAM 3D Printer Main Control Board, for MKS TinyBee MINI12864

1. Adapted Firmware: This is a 3D printer main control board with ESP32 WIFI on board, supports for Marlin2.0 firmware, supports for MKS MINI12864V3 in addition to the common LCD2004,12864 screen.
2. Support Serial Screen: The 3D printer control board supports for MKS TFT serial screen. It can update firmware via USB, connect to WIFI and web page to control printing.
3. WIFI and Bluetooth Module: 3D printer motherboard adopts ESP32 ROOM 32U module, embedded dual core 32 bit high speed MCU, clock up to 240MHz, and integrated WIFI, Bluetooth module, the performance is very powerful.
4. Memory Chip: In addition, the module has a built in 8Mbyte flash memory chip to provide effective protection for more application scenarios.
5. Applicable Models: Our ESP32 WIFI 3D printer motherboard for MKS TinyBee MINI12864 is a good replacement part for old and broken parts.

Spec:
Item Type: 3D Printer Motherboard
Material: PCB
Mcu: ESP32 WROOM 32U
MCU: Frequency 240MHz
Flash: 8192K
RAM: 520Kb
Power Input: DC12-24V Less Than 20A
Heater Head, Hot Bed: 2 Heater Heads, 1 Hot Bed
Temperature Measurement: 3NTC100K: TH1, TB,TH2 (Need Jumper To Select)
Controllable Fan: 2 Way Controllable Fan
Motor Interface: 5 Axes Drive, 6 Motor Interface (Dual Z Axes Parallel Output)
Drive Mode: STEP Or DIR Standard Touch
Drive : Pin Way To The , Support External
Subdivision Settings: Dip Switches To Set The Subdivision
LCD Interface: Support Ordinary LCD2004,12864 Support for MKS MINI12864V3
Serial Port: Reserved Serial Port 2, Support for MKS TFT Series Serial Screen
Limit: X,Y,Z,MT DET
3D TOUCH: Support
Power Protection: Anti Reverse Connection Protection And Power Spike Protection
Firmware: For Marlin2.0.X
Firmware Update Method: Online Download Via USB

How to Use:
Before installation, read the wiring diagram carefully and install according to the wiring

WIFI and Bluetooth Module: 3D printer motherboard adopts ESP32 ROOM 32U module, embedded dual core 32 bit high speed MCU, clock up to 240MHz, and integrated WIFI, Bluetooth module, the performance is very powerful.
Adapted Firmware: This is a 3D printer main control board with ESP32 WIFI on board, supports for Marlin2.0 firmware, supports for MKS MINI12864V3 in addition to the common LCD2004,12864 screen.
Memory Chip: In addition, the module has a built in 8Mbyte flash memory chip to provide effective protection for more application scenarios.
Support Serial Screen: The 3D printer control board supports for MKS TFT serial screen. It can update firmware via USB, connect to WIFI and web page to control printing.
Applicable Models: Our ESP32 WIFI 3D printer motherboard for MKS TinyBee MINI12864 is a good replacement part for old and broken parts.