NymoLabs NBS-6040 CNC Router Machine with Custom-Made 710W 7000-30000 RPM Trim Router Spindle & ER-11 Collet, Linear Rails & Ball Screws on 3-axis, Engraving for Wood Acrylic Aluminum

NymoLabs Custom-made 710W Router: The NBS-6040 features the Self-developed Trim Router as a spindle, a Second-to-none move in the market. Its soft start, and constant current drive features, make the spindle RPM slow to fast without stalling, ranging from 7000 to 30000 adjustable. ER11 Collet Gripping Range: 1-8mm, 1/4″, 1/8″.
Linear Rails & Ball Screws on Every Axis: The NBS-6040 uses linear rails and ball screws on every axis for increased productivity and accuracy. These are built for much larger, heavier machines and maintain the rapid movement that 6040 has always been capable of while adding a ton of rigidity.
Based on Open-source Grbl v1.1: The NBS-6040 CNC router features the driver with 32-bit chips, making the pulse frequency up to 80 KHZ. Adds 4-axis linkage motion, MPG, offline control, 3-pin laser port, air pump, and other extended functions. It also supports transforming the code files from offline controller to local memory to engraving stabler.
Create a New and Friendly Maker Ecology: In order to give makers a better experience, we reserved a series of expansion function ports when designing, including the fourth-axis expansion (four-axis linkage), MPG, Z probe tool set, air pump port, lighting port, air blowing, and dust boot placement,.etc. Which will be listed separately in the coming next!
Modular Design: The pre-assembled modular design makes the 20-minute installation possible, with just a few installation steps and wiring of electronics before starting your projects. Now with a larger working area (23.62″ x 15.75″ x 4.53″), 710W trim cnc router spindle, The 6040 CNC router is ready for all your projects.
TFT Touchscreen Offline Controller: With a 2.8” touchscreen display, the NBS-6040 offline controller makes controlling your engraving machine simple and convenient. Users can operate 6040 manually, or put it on the Electric Controller Box reserved placement.
Tips: The ER-11 Router is made for use in CNC machines so we skip all of the bases and jigs that won’t be used anyway. The 1/4″ collet is Not included in the package.