FYSETC 3D Printer Platform 120mm Flex Plate – Removable Print Bed Surface – Magnnetic Spare HotBed Cover: 2 in 1 Printing Build Surface for PLA PLA+ Only Compatible with VoronV0 V0.2 Accessories 4.7in

FDM 3D print hotbed Necessary Component: the sticker’s material is plastic, so its ideal temperature for printing is about 50-75℃/ 122-167℉, it means this 3d printer bed mat only fit for PLA PLA+ WOOD or TPU, not work well for PETG ABS ASA and other printing material that need higher temperature(75℃+/ 167+℉). Every printing plate’s material has its advanture and limited, if you have PEI steel sheet or glass bed, but often print some small pla or pla+ filament models, then get one for spare.
Easy to install: 2 in 1 heated bed cover kit – come with plastic surface and strong adhesive backing sticker, if can not stick well, please rotate the build surface 90 degrees to get it to adhere well. Better adhesion, you have to make sure there’s no dust or debris on your bed before applying the magnet, otherwise there will be a bump on the print surface. Also, be ready to adjust your Z step motor because your height may be off enough that the leveling knobs don’t do it.
Easy to remove (PLA PLA+ only): No problem with adhesion, the plastic adheres well to the cover and is easy to remove once the print is completed.
Flexible build plate: This print bed a must have tool for 3D printing. Material: made of plastic, it is not metal.
Size: square 120X120mm/ 4.7*4.7inch, magneet stick’s thickness is about 1.2mm(strong enough). compatible with Voron0.2 Pro, Vorn 0/ VoronV0.1 V0.2 fdm machine, if need 6.49in 7in or round 4.7in, please enter our shop. The size can cut for other smaller size. Before ordering, please measure your real heat bed, if you can accept 5-10mm, then get it.