Creality K1 Max 3D Printer, 600mm/s Max High-Speed 3D Printers with Auto Leveling, Dual Cooling, Smart AI Function and Out-of-The-Box, Large Printing Size 11.8×11.8×11.8in

600MM/S HIGH-SPEED PRINTING – The Creality K1 Max 3D printer is designed for efficiency, boasting a maximum speed of 600mm/s and 20000mm/s² Acceleration, which is 12 times faster than a regular FDM 3D printer. Perfect for professionals and beginners.
11.8×11.8×11.8in LARGE PRINTING SIZE – The K1 Max boasts an impressive printing size of 300×300×300mm, allowing for multiple models to be printed simultaneously, significantly increasing printing efficiency. Additionally, its print volume to printer size ratio can reach up to 25.5%, the biggest compared with similar-sized printers.
SMART AI LIDAR & CAMERA – The 1μm resolution LiDAR will scan the first layer on its own. It will pause printing and tell you immediately if something goes wrong. And K1 Max uses an AI camera to watch over spaghetti failure, foreign objects, debris, etc. It will alter you when an error occurs. It also supports real-time monitoring and creates time-lapses for sharing. Furthermore, The strain sensors in the heatbed generate an accurate leveling mesh for auto compensation.
OUT-of-THE-BOX – K1 Max is assembled and calibrated before shipment, and it offers a boot-up quick guide and allows self-test with one tap. So, users can print right out of the box. The Creality K1 Max offers hands-free auto leveling, the strain sensors in the heatbed deliver hands-free leveling, while the AI LiDAR scans the bed tilts at a million points for more precise leveling. Its heatbed heats to 60℃ in just the 90s. Ensuring perfect prints every time without the hassle.
32mm³/s FlOW & DUAL COOLING – A new ceramic heater encircling the hotend can melt various filaments instantly. The dual-gear direct drive extruder and titanium alloy heartbreak ensure 32mm³/s full-blast feeding flow in up to 300℃. The freshly printed model is cooled rapidly by two fans, one on the printhead with directional air ducts, and another in the build chamber. The model hardens before any stringing and warping could happen.